|
Ok 3:30 a.m. and I only have questions about a car.. I need serious help..Anyway, today while installing a homemade intake bellows on my 79 242 GT, B21F, M46, I came across a pair of wires. They are green and brown. They are inside a single black sleeve. They have a connector on the end. It is the same type connector as goes to an injector on a 2.4 or so injection system. There is even a boot covering it that is exactly the same as the boot over an electronic injector. Keep in mind this is a manual injection system. This wire is running from the main harness at the firewall to it's termination just short of the A/C unit. Now the A/C is not connected but the connector coming from it is a single spade terminal. I have no idea where the rest of the A/C wiring has gone. The PO just nylon tied it to the A/C hose near the back of the compressor. Any ideas?? Thanks.. Max
--
Max..1989 244 DL 5 Spd., V15 Phase II Cam Bilstein HD, Turbo Swaybars, Poly Bushings all round, Turbo Wheels, Black leather interior, Electric mirrors, LED dash and gauge lights and now NEW ECODES with the turn signals, 1992 black 244 next project
|
