Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coil question for my diesel to gas car conversion 200

posted by  volvo245kit on  Sun Apr 20 10:31 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 30 20:54 CST 2011
[RELATED]

Okay, here's the deal. I've been trying to figure out why my conversion car won't start. I went to do the test listed on pages 280-8 and 280-9 from the Bentley manual. I got to step #5 and when testing my coil it didn't read what the book said it should. It says to replace the coil. I am using an MSD Blaster 2 coil that's brand new. I'm getting .7 ohms between terminal 1 and 15 (book says 1.1 to 1.3 ohms) and I'm getting 4.47 ohms between terminal 1 and the tower (book says 9600 to 11600 ohms). Does this mean that I can't use this coil? Is there something else I need to change to make this coil work or do I need to fork out for a new Bosch coil? Any help will be greatly appreciated. Thanks, Charles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Coil question for my diesel to gas car conversion [200]
posted by  volvo245kit  on Sun Apr 20 10:31 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.