Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2008 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

pulling the B20 engine on the ES 1800 1973

uid 39111's pic
posted by  Kenner on  Tue Mar 17 12:16 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 24 15:42 CST 2014
[RELATED]

Winter is leaving. ES is out of the garage. I think it is time to start restoration. I need some under carriage repair so I think yanking the engine is next.
Is this a bad idea?
Any tips?
I have never pulled an engine. Well not out of a car.
I assume the trani should come out too.
Do I need to yank the manifold(s) first?
Is there anything in the way (brake booster, blower motor, rad, etc)that i need to clear?
Are there lifting lugs?
It looks relatively straight forward. I remove the hood and well kind of keep digging until I can pull it up and out.
--
73 ES, 91 240, 98 S90






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New pulling the B20 engine on the ES [1800][1973]
posted by  Kenner  on Tue Mar 17 12:16 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.