Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2007 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Yet More Advice 1800 1973

posted by  RepairmanJackal on  Fri Mar 20 12:41 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 10 09:52 CST 2014
[RELATED]

Well, I recommend removing those parts to make extraction easier. It can be a challenge to get them off, but if you can lift it carefully You could leave them attached.

I pull them because if they get hit hard, they could crack or break. Similar worry for the dizzy. My goal is to get all the extra weight and "breakables" off. But recall that I do this by myself rolling the car forward and backwards to clear the tranny tunnel...

I pulled the 1800E engine only after removing the gearbox because of the cramped quarters in the engine bay. I put a piece of wood behind the head to keep the engine from hitting the firewall after "dropping" the gearbox.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New pulling the B20 engine on the ES [1800][1973]
posted by  Kenner  on Tue Mar 17 12:16 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.