Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2012 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing gear replacement 120-130

posted by  ecliffs on  Thu Apr 29 16:18 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 25 09:48 CST 2011
[RELATED]

Its total tear down time and its time to remove the steel timing gears and cam on an early B20B (six bolt flywheel). The engines out and upside down on a stand with the fly wheel blocked. Is there a way to get the gear on the crank off without a special puller for the hub. Are there work arounds to get the big nut on the cam gear off without putting a long bar on the floor and bolting it to the gear (to take the pressure off of the cam and the fly wheel). Any help would be appreciated as I have no source for all the "special" Volvo tools. Thanks for the help.
Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing gear replacement [120-130]
posted by  ecliffs  on Thu Apr 29 16:18 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.