Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing gear replacement 120-130

posted by  ecliffs on  Fri Apr 30 16:54 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 25 09:48 CST 2011
[RELATED]

Well, the Cam gear is off. My nut was actually 37mm, but with some minor grinding a 36mm socket was made to fit (they don't make a 37 and a 38 (11/2") jumps to a 3/4 drive. It was very hard to get off (torqued right up), but once it was off the cam gear slide off easily, by hand. Still working on the crank gear, my screwdriver small enough to fit the bolt holes is a little too flexible to get enough pressure on the hub. Will have to get something stiffer to apply enough force. Perseverance!
Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing gear replacement [120-130]
posted by  ecliffs  on Thu Apr 29 16:18 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.