Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

steering rack replaced & bled, still shudders while turning... 200 1989

uid 33936's pic
posted by  TheBrickTank on  Tue Jul 10 11:58 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

All,

Any thoughts on this?

I finished up the install this morning. Ran through a quart of new power steering fluid. All new hoses, new pump, new rack.

I bled the system as described in the FAQ and I got lots of air bubbles. Before I set her down I checked one more time and all seemed to be well.

I took her out for a quick spin and the steering would shudder while going round turns. One side was definitely worse than the other but I can't remember which side.

Any thoughts? Do I just have to drive for a couple of days till the remaining air works it way out? The rack is definitely a CAM not a ZF.

Please advise as to what I'm missing here.

Thanks,

Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New steering rack replaced & bled, still shudders while turning... [200][1989]
posted by  TheBrickTank  on Tue Jul 10 11:58 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.