Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

steering rack replaced & bled, still shudders while turning... 200 1989

posted by  Rhys on  Thu Jul 12 10:25 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 20 10:22 CST 2012
[RELATED]

I don't mean to harp on this, but is the belt new? If it's polished from previous slipping, it's useless. Also it must be a correct fit in the sheaves, not bottoming out in the groove. I've seen that too.
Hoses drain when the rack is replaced so replacing the hoses makes no difference at all. I've replaced pumps too without any trouble bleeding. I'm sure you've bled the rack properly. That leaves the drive belt, or the rack is faulty internally, and I hope that's not the case.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New steering rack replaced & bled, still shudders while turning... [200][1989]
posted by  TheBrickTank  on Tue Jul 10 11:58 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.