Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel pump priming, 142E 140-160

Hi,

I drained the tank on my 1971 142E so I could replace the hose to the fuel pump and check to see if the (noisy) fuel pump was plugged with dirt. I put two gallons of gas in the tank and tried to start the car, but the pump wasn't pumping. I tried to prime the pump by sucking gas through with a small vacuum pump, but it still won't start.

My question: do I need to add more gas to the tank until the pump will self prime, or did I destroy the pump taking it apart?

Thanks for you help.

Ross






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel pump priming, 142E [140-160]
posted by  someone claiming to be Ross  on Mon Apr 1 07:55 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.