Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Setting CO using 12v LED ? 200

posted by  someone claiming to be pete on  Mon Jan 20 08:30 CST 2003 [RELATED]

Its time for my car's yearly emissions test for my 1985 . I usaully check the 02 sensor voltage and use a Radio Shack 12v LED between the beige/blue stripe pigtal and the postive battery terming and adjust the AMM until there is any equal time of on-off of the LED . ( The method was found here and at www.mvp.com some time ago )

However, this time I go a surprise . The light satays on no matter which way I turn the AMM CO adjustment screw . I replaced thye O2 sensor with a new one just to make sure I had a good one and still got the same situation . Of course the emission and tag deadline is tomorrow . Some trouble shooting help is greatly appreciated .






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Setting CO using 12v LED ? [200]
posted by  someone claiming to be pete  on Mon Jan 20 08:30 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.