Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Steve... cam gear info 140-160

posted by  someone claiming to be bignipper on  Wed Mar 5 10:24 CST 2003 [RELATED]

The place is called Kim Shepard engineering. He is in Frederick St Launceston, between Charles St and Wellington St. His number is 6334 0400. The cam gear is steel and is $120 and he can regrind your cam for $88. He also refaces the lifters for $4.50 each. I'm going to put this cam in that reco motor I got from the wreckers for 50 bucks and see how it holds together. I can also get a porting job and valve-grind and new seals for $200. I'll let you know how that turns out. I would also like a to find a set of extractors.
I was down the Huon last month showing some rellies around from the UK, they were impressed. We stayed with freinds in Glen Huon, Rob and Wendy Watson, you may know them, or you may not. Have you got any projects on the go?
Cheers, Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steve... cam gear info [140-160]
posted by  someone claiming to be bignipper  on Wed Mar 5 10:24 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.