Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Downpipe clamp. Where to attach? 120-130

posted by  walrus3 on  Wed Jan 17 04:09 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

It is an arm held by the rear tranny mount bolts starting out as an angle
about 0.100" thick and about 1½" on each leg. The vertical leg tapers to
nothing and the horizontal leg has slotted holes in it to allow for lateral
alignment. I am fairly sure the same (or very similar) arm was used on the
122, 140, 164 and probably the various 1800 models probably starting around
1967.
--
George Downs Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Downpipe clamp. Where to attach? [120-130]
posted by  Tom O.  on Tue Jan 16 19:02 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.