Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2001 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Trouble with 122 automatic 120-130

posted by  planetman on  Fri Feb 9 14:37 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

What Ron meant was to make a mark on the end of the shaft preferably a scratch mark with a sharp awl or pick, and then a matching mark on the clamp so that when you need to re-assemble, you can easily visually verify that you have aligned it back the way it was before you removed the clamp.

It is quite important that you do this, before you loosen the clamp.

BTW, except for the one bushing Ron meantioned that supports the shift column where it goes through the firewall, ALL the other bushings for your linkage are available new.

I have them all in stock if you need them.

Eric
Hi Performance Auto Service(formerly OVO or Old Volvos Only)
Torrance, CA 90501






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Trouble with 122 automatic [120-130]
posted by  Moloko  on Fri Feb 9 12:27 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.