Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine cutting out problem 200 1989

posted by  viperman135 on  Mon Sep 17 11:31 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 11 05:13 CST 2009
[RELATED]

Just wanted to give you guys that helped me out so much a little up date. The guys at the dealership finally figured the problem out. They took the voltage regulator out it is fell apart in there hands. The brushes were really shot on the thing. After a new one the 240 runs like a champ. So I dont have to take it to them again I need some advice. I'm pretty good with the mecanical side of things leaks and broken stuff I can figure out but electrical gives me a head ache. Are there any other electrical things know to wear out I should look into? I think I'm going to get new RPM sensor since so many of you recomended it. Anything else? I know the starter has brushes should I replace them? I have already done plugs,wires,rotor, and cap. Thanks for the help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine cutting out problem [200][1989]
posted by  viperman135  on Mon Sep 3 16:12 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.