Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Am I ready to replace the Crank Position Sensor? 200 1990

posted by  TONY H on  Thu Dec 9 05:10 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 16:39 CST 2014
[RELATED]

Have you looked at the Bolt you need to get to yet?

You can see it from the passeneger side of teh car. Follow the Tube coming out the back of the Water pump all the way behind the engine.
Crack the bolt loose with a wrench then do the rest with a 12" extension on a 10mm swivel socket.
A little more encouragement: My orignal Sensor came out without a hitch after being there from '89 'til 2009. Some have horror stories so I set up a full day to play with this and I was done in 30 minutes.
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Am I ready to replace the Crank Position Sensor? [200][1990]
posted by  Euroman  on Mon Dec 6 09:29 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.