Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Crankcase Ventilation System 700

posted by  Grassman on  Sun Mar 20 09:25 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 4 07:10 CST 2014
[RELATED]

There are no ports to connect the small vacuum hose from the flame trap nipple to the throttle body. When I checked the vacuum hose diagram it showed a tee from the pcv to the egr. The vacuum hose from the intake to the egr is new and has no tee so I'm assumming this is where it goes. I will clean the throttle body also. There is oil leaking from the valve cover and oil fill cap and when I removed hoses for the intercooler there was a residue inside. I will clean the hoses and breather box and order a flame trap nipple. Thanks Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankcase Ventilation System [700]
posted by  Grassman subscriber  on Sat Mar 19 17:25 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.