Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2001

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adjusting Height of Sunroof Panel on 740

posted by  Chris Mullet on  Sat May 11 16:42 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:08 CST 2014
[RELATED]

"...The front edge of my sunroof is BELOW the roof by about 3/16", but is correct from mid-way back, and across the back of the opening..."

If the panel is at the correct height along the aft edge, and it is also at the correct height at the the mid point along the sides, yet the leading edge is 3/16 below the roof line, then it sure sounds like the panel is bent down in front. What do want to bet someone sat up on the roof with the sunroof open, legs dangling down into the car (parade style) And inadvertently applied too much weight to the front edge of the sunroof panel? You may have to open the sunroof about half way and bend upward on the leading edge of the panel.

When you close the sunroof, does the leading edge of the panel ever get hung up on the wind deflector?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adjusting Height of Sunroof Panel on 740
posted by  BobbyC  on Sat May 11 13:03 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.