Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Divide and Conquer 200

posted by  HillBilly on  Sat Aug 10 11:47 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 16 08:26 CST 2014
[RELATED]

The vacuum check valve is located in the vacuum line that runs from the engine intake thru the firewall and on to the heater controls.

The check valve is a round disc about 1 diameter and about 3/8" thick.
One side black and one side white and a nipple on each side for a vacuum hose to attach.

You need to inspect this vacuum line from the engine intake, thru the vacuum check valve and on thru the firewall to make sure that you don't have any leaks.


hope this helps
steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New One won't work, the other won't stop working [200]
posted by  bulletproof subscriber  on Sat Aug 10 07:06 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.