Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No start problem 200 1976

posted by  Trev29 on  Sun May 11 05:10 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

"i cleaned the passage in the manifold and checked the line to the distributor but still no change"

Remove the hose at the manifold and feel for suction with your finger tip. Rpms will probably pick up with the new vacuum leak.

"the vacuum advance for the distributor has absolutely no vacuum on the inlet side of things"

Check to see if the vacuum advance in the distributor responds, by applying vacuum by mouth to the hose and watching for plate movement.
--
1980 245 Canadian B21A with SU carb, M46 trans, 3:31 dif, in Brampton, Ont.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No start problem [200][1976]
posted by  Wolvo  on Sat May 3 16:11 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.