Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball Joints

posted by  john sargent on  Wed Mar 27 08:29 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

I used a two jawed gear puller to press the ball joints out of the lower control arm. I have a ball joint press, but it was a little too big. I used the three jaw version of the same gear puller to press the tie rod ends out.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Handling problem solved
posted by  john sargent subscriber  on Tue Mar 26 15:54 CST 2002 >
  • New Ball Joints
    posted by  nyroguls  on Wed Mar 27 05:41 CST 2002 >
    • New Ball Joints
      posted by  john sargent subscriber  on Wed Mar 27 08:29 CST 2002 >
    • New Ball Joints
      posted by  someone claiming to be ringlee  on Wed Mar 27 08:30 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.