Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Throttle body question 700 1988

posted by  david hunter on  Wed Mar 19 02:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 30 22:10 CST 2014
[RELATED]

Sounds as if you have a false limit somewhere, possibly on the switch. The plate should close completely. The large black plastic screw is adjusted to bypass a bit of air around the plate to give a base idle speed of 700 or so with no IAC. When active the IAC then regulates idle a bit higher at 750 or 900 with AC on. The switch should click and transfer just as the plate starts to open, this is adjusted by shifting the switch slightly. The metal stop nut is adjusted to keep the linkage from pulling back on the plate once it has closed.
--
David Hunter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle body question [700][1988]
posted by  fisher  on Tue Mar 18 01:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.