Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Injector spray pattern testing - kjet 200 1980

posted by  someone claiming to be sydney on  Mon Apr 14 10:06 CST 2003 [RELATED]

Thanks for the procedure for the injector testing, Art! I will file that away
for future use. I did check the CIS sensor plate for height adjustment and it
was ok. What I did find was a cracked vacuum hose that goes between the
Auxiliary Air Valve and the manifold. It seems that replacing the hose and
slightly retarding the timing resolved the high HC readings. Thanks again for
the assistance !! Syd.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New High Hydrocarbon TailPipe test B21 Injector Test? [200][1980]
posted by  someone claiming to be sydney  on Sat Apr 12 11:39 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.