Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Converting Drum to Disk and front brakes 120-130 1968

posted by  chevy on  Sun May 11 21:37 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 20 02:08 CST 2007
[RELATED]

I think the current brakes are fine. They seem to stop just as well as my 144 with 164 brakes. The only reason I was interested in a brake upgrade was because I need to change all the bushes/ball joints in the front end so I was interested in what else could fit while I had it apart and then the rear end conversion just to keep the brake bias right.

I think a good set of front pads and adjusting the drums will do for now but I love great brakes and I have been know to be a bit hard on them at times......seems that only old volvo brakes can put up with me! :)

As for the cam, I haven't finished the motor yet but I'm going to order a cam from kgtrimning (KG19 312deg intake and 292deg exhaust). I'll tell you how it goes when I install it.

Thanks All!!!!
--
Alex Shevlin (Sydney): '71 142S, '72 144S, '81 244GLE, '81 244GL, '01 V70XC






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Converting Drum to Disk and front brakes [120-130][1968]
posted by  chevy  on Sun May 11 02:18 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.