Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do you have any tips for me? 200

posted by  244_DL on  Fri Jun 20 06:27 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am planning on changing all my belts, the motor mounts, and the seals on my '79 244 DL and was wondering if there was anything I might need to know before I start. The only thing that makes me nervous are the seals. I have done a lot of work on my brick and my old mazda pickup already but I have no prior experience on engine seals. Currently my brick is eating oil. The oil filter and area just above it are becoming coated in oil.
I own the haynes manual and have found some very helpfull sites online, especially for the motor mounts.
Should I buy any other books?
What web sites do you use frequently?
What kind of job am I looking at for the seals?
Where should I get them from?
While I have the engine apart is there anything I should inspect or replace?
Sorry I kind of asked a lot of questions.
Any help would be great---Thanks, Paul.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Picture Worth a Thousand Words [200]
posted by  someone claiming to be ellen_brick  on Fri Jun 20 03:50 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.