Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Supercharging a B20 (AGAIN) 140-160

posted by  CyaLater on  Tue Jul 29 03:42 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Dual springs would be mandatory on the inlets. If you are running 10psi of boost you would need an extra 25lb's of seat pressure just to counteract that.
For a cam I would use something like a C on the inlet, something very big on the exhaust & very wide lobe centres to reduce the overlap down.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Supercharging a B20 (AGAIN) [140-160]
posted by  Tom 760t  on Sat Jul 26 11:11 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.