Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

pulling engine and tranny at same time.... 200 1987

posted by  Rludwick on  Mon Aug 9 07:06 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 31 16:10 CST 2013
[RELATED]

Just remember that if ou are having to manually force anything, you're doing it wrong. If you have a tilter on the crane , it should be a simple , time consuming , removal without any struggling, without a tilter, if it gets in a bind, lower it onto blocks and re-position the chain.
Whatever you do , don't try to force anything. there's alot of weight swinging around there and it's easy to get in trouble if you get in a hurry.

When pulling vacuum hoses etc, put a piece of tape on the hose and the fitting it came off and number each one so you won't have any guess work when going back in
--
-------Robert, '93 940t, '90 240 wagon, '84 240 diesel (she's sick) , '80 245 diesel, '82 Mercedes 300SD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New pulling engine and tranny at same time.... [200][1987]
posted by  Dan D.  on Sun Aug 8 21:36 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.