Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2012 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Greasing the PV 444-544

uid 5098's pic
posted by  Sil on  Thu Dec 27 10:29 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:24 CST 2014
[RELATED]

I just got through with the delightful annual chore of greasing my PV544. Knowing that the inner upper control arm swivels would give me a rough time, I bought a pneumatic grease gun. Well, forget it, no way could I get any grease to go in those two nipples, not even with 110 lbs of pressure, so I went back to my manual gun. I now have a stiff neck and a sore right shoulder and arm from squeezing the damned thing, and I'm still not sure if I got any grease in. I've been told that the grease would go in more easily if I jacked up the whole control arm assembly, but up or down, still no go, or if any go, very little of it - no old grease squeezing out from under the rubber seals. I had the whole assembly apart for inspection and seal replacement some years ago and I know all the passages are free. Anyone else having this problem?

Bob S.
--
'62 PV544 (B20, M41), '71 142E, '93 240 Classic Wagon.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Greasing the PV [444-544]
posted by  Sil subscriber  on Thu Dec 27 10:29 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.