Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bench testing the starter 200

posted by  gopeshs on  Tue May 27 04:04 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 19 14:01 CST 2014
[RELATED]

I wanted to know how can I bench test the starter. I read archives though there is some confusion.
There are two parts (bypassing the solonoid)
One post states one should short between the +ve terminal where the HD battrey lead connects to terminal where the heavy braided wire connects . Can I connect battrey +ve directy to terminal where braided wire connects .

Can one replace the solonoid separately if it is culprit.
I also wanted to know if the solonoid is only sticking then is it worth cleaning it or it is too worn out now.

(Bypassing the Starting key )
2nd confusion is it also says to connect a separate lead from battrey +ve to where yellow /blue wire connects . Can not I short this termial to the main terminal where battrey +ve connects . This is what I tried and results were -ve.

I have already ordered a rebuilt bosch which has yet to arrive but wanted to confirm.



--
DD-1990 240 DL SW M47II FI 3.1 220 K miles Turbo Sways,Custom headlight circuit ,Insulated roof,Tinted Glass,






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bench testing the starter [200]
posted by  gopeshs  on Tue May 27 04:04 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.