Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Regina problems 700 1990

posted by  Sumerduckman on  Wed Jan 18 01:41 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 21 11:31 CST 2007
[RELATED]

What are the code number/s being set? Pull the number/s ( check for more than one code ,as per the 700/900 faq), then clear the memory, start the car and let it run a few minutes, shut off then check for codes again.
Off the top of my head, I would say that you somehow lost O2 signal ground when the head pipe was replaced.
You can check that if you have a DVOM. Check for continuity between O2 sensor base ( with signal plug from o2 sensor to ECU disconnected), and the ECU ground connection at the intake manifold.
--
Gary Gilliam Sumerduck VA, '94 940 Regina 165k '86 240 195k, 93 Camry 4cyl 5spd 245k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Regina problems [700][1990]
posted by  Rhaj  on Tue Jan 17 08:17 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.