Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

IMO, it's NOT the Crank Position Sensor 200 1993

posted by  pr240sx on  Thu May 18 02:16 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 20 07:30 CST 2007
[RELATED]

Yesterday I removed and checked the crank sensor, wiring is all torn up and sensor was dirty as hell.
No then, the fuel relay switches relay activation when cranking, while the key is in ON one relay activates (fuel pump prime I guess) then shuts off and activate the other. When I crank it activate again, but no spark.
I think that I will replace the crank sensor just because the condition of this, dunno if its working or not and check if I can find a power stage cheap around here.
Also, how can I check if the fuel injector computer is working properly? I have some sort of diagnostic port but all the cables are loose inside. Is there a posibility to "fry" any ECU by shorting these wires?
My manual is beign shipped today!! woohoo!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 93 240 no start situation [200][1993]
posted by  pr240sx  on Mon May 15 09:20 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.