Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cold start 200 1988

Hello Art,

Thanks for the information. I have only the one (currently dismantled) 240 and limited experience with Bosch FI.

I have pondered the "why" for so many changes to basically the same system over the years. I suppose it has something to do with trying to stay up with changing emissions rules worldwide. Regardless of why, there seems to be at least a dozen different variations of the LH system plus the Rex/Regina.

You mentioned something that makes me wonder about a cross connection or miswire:
"Based on temperature clues from the ECT and an ECU input on the starter solenoid terminal (key position III)..."

What if the cold start signal was being sent to the ECU at all times, rather than only at start? Even though the car quit one day and hasn't run since, it was at a dealership that declared a functional ECU defective. Maybe the same technician crossconnected or miswired the cold start circuit? If I am reading the prints correctly PIN 4 of the ECU should have voltage only during START, correct? Randy, have you checked that?
--
Mr. Shannon DeWolfe -- (I've taken to using Mr. because my name tends to mislead folks on the WWW. I am a 51 year old fat man ;-) -- KD5QBL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No start, floods out; continuing saga (addition information) [200][1988]
posted by  rstarkie subscriber  on Wed Jun 20 13:57 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.