Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine seized 200

posted by  volvosfive on  Mon Nov 19 15:38 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 21 08:01 CST 2011
[RELATED]


Over the past couple of months, I've been working a little at a time to swap a used engine into a '91 240 that I bought last spring. The used engine is of unknown condition and was turning over just fine while it was stored in my garage. Well, I got the engine into the car and noticed today that it is locked up. I put a breaker bar on the end of a socket on the crank pulley bolt and can't get it to budge. When I put the engine into the car a few weeks ago it turned over just fine by hand. How could it have locked up this soon? There's no sign of moisture in the oil.I checked to see if anything was caught around the flywheel, but it's all clear.

So, I'm thinking of pulling the engine and rebuilding it. I also have a B230 FT engine available. Maybe swap that into this 240 with an M46 to replace the AW 71?

Thanks,
Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine seized [200]
posted by  volvosfive subscriber  on Mon Nov 19 15:38 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.