Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Thinking further... 200

posted by  lucid on  Sun Jul 20 09:20 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

...on the switch vs relay, aside from the switch location issue, I think you could wire your switch to control the solenoid and light in opposition by wiring the switch backwards (which is sort of how the OD relay is) like this:

Relay 30 is used as an output, and wired to both the solenoid and the Y/R arrow light wire.

R87 is wired from fused 11, taking the 12V to the solenoid and light in one switch position. (Solenoid gets energized, light goes out.)

R87a is wired to ground, so the light comes on and the solenoid is "dropped" when the switch is transferred.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Overdrive cut-out modification [200]
posted by  scorron subscriber  on Sun Jul 20 05:09 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.