Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

back up/reverse lights check engine light 200 1989

uid 29404's pic
posted by  punk240 on  Mon Jan 19 16:34 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

Art's right... The Black wire is the ground.
But to carry things further along in finding this wire and what it needs to connect to...
Remove the Shifter Cover (two screws at front)
Reach to the forward right portion of the "bucket" the shifter sits in.
You should feel a triangular plastic unit with 4 wires soldered into its passenger side face.
Blue & Yel/Blue work with the Parking Relay
Black & Yellow are the Reverse Lights (switch)

Turn car on and Set parking brake and shift to reverse.

Check for continuity with Blk & Yel THEN check for the same continuity with a either exposed contact in the LEFT reverse light.

I just went thru this crud 2 days ago.
Tim
--
'92 244 NOW w/ M47 (Hydra, turbo bars, bilstein, urethane bushings)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New back up/reverse lights check engine light [200][1989]
posted by  joni74  on Sat Jan 10 07:38 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.