Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2008 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Easy out... 120-130

posted by  volvostud on  Sat Sep 12 15:56 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 28 16:34 CST 2009
[RELATED]

If you can get to it with a dremel either drill a starter hole or cut a notch in it. If you can notch it you can sometimes get at it with a large flat screwdriver. give it a good soaking with a thin lubricant to help make the extraction easier.

Once you get the easy out out then drill the center out of the bolt. Sometimes that will get it going or make it easier to use another easy-out. If drilling the center does not work just move up to larger and larger bits till you drill the whole bolt out. Then Helicoil and be done.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Easy out... [120-130]
posted by  benwah  on Sat Sep 12 09:12 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.