Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Codes pulled from new car 200 1993

I replaced the TPS, cleaned the IAC, replaced the AMM, cleaned the flametrap, replaced FPR, sprayed around injectors with water and also the intake with no change in RPM.

I can not find the location of the O2 sensor to save me. There is a plug in front of the cat, but no sensor. It is a new exhasut system from header back to the rear muffler. I have checked the entire length of the system and cannot locate it. Could it be they didnt replace it when the change the system?

I will put it up on ramps tomorrow and see if I can see more.

Thanks for the help,

Frank






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Codes pulled from new car [200][1993]
posted by  fpeck1948 subscriber  on Thu Sep 24 09:25 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.