Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Converting 2.4 to 3.1. What do I have to replace? 200 1990

posted by  Jorrell on  Thu Nov 18 06:36 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 27 03:00 CST 2012
[RELATED]

We have a 92 LH 3.1 car that I swapped an automatic transmission in to, so I can assure you it will work. One part that is easy to miss is the throttle body as they look the same between 2.4 and 3.1 but are very different. 3.1 uses a position sensor rather than a position switch. The shaft of the throttle bodies are also different so you can't just swap the sensor for the switch.

jorrell
--
92 245 299.3K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently taking names and kicking reputations!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Converting 2.4 to 3.1. What do I have to replace? [200][1990]
posted by  someone claiming to be Benzo  on Thu Nov 18 04:58 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.