Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Converting 2.4 to 3.1. What do I have to replace? 200 1990

uid 27's pic
posted by  Art Benstein on  Fri Nov 19 13:13 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

John, your project car has always received my envy and admiration. Another feather in the 240's cap, and a classic at that. If you asked me, you have either end of Volvo's good era bracketed by your PV and Classic.

And I'll always remember my first encounter with FUD as an acronym. At the time, our CEO was a sales veteran, and a strong advocate of the power of the FUD factor. He thought I could deliver it.
--
Art Benstein near Baltimore

The 50C5 was introduced in 1948, to address concerns that the set might pose more of a shock hazard to the user if the 35W4 and 50B5 were to be accidentally interchanged. The 50C5 is a 50B5 with a different pin-out.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Converting 2.4 to 3.1. What do I have to replace? [200][1990]
posted by  someone claiming to be Benzo  on Thu Nov 18 04:58 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.