Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Converting 2.4 to 3.1. What do I have to replace? 200 1990

posted by  yama on  Thu Nov 18 06:47 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Is it a purple label or white label 572 ECU? I have seen a couple of 3.1's junked for bad purple label ECU's. If its a white label 572 you should have allready grabbed it. The main pieces you need are the ECU, AMM and throttle body/sensor. Some of the wiring on the harness is different. Not sure if its practical to swap the harness as opposed to having to cut and splice. There is an article on trubo bricks that goes from 3.1 to 2.4.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Converting 2.4 to 3.1. What do I have to replace? [200][1990]
posted by  someone claiming to be Benzo  on Thu Nov 18 04:58 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.