Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My view is.... 444-544

posted by  derek uk on  Sat Sep 17 08:32 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

Adding some support here. The SU HIF is a direct swap for an HS6 and is an all round better carb. Should be no air leak problems. I'd suggest the K cam too as this will be about as torquey as an A cam in your big engine but rev out a lot better. I like the A cam too but it hits a brick wall at about 4k revs.
Other posts on various forums have indicated that Volvo parts for early engines are a bit thin on the ground and as mentioned, importing heavy parts gets expensive.
Oz not too far away though.
http://www.volvoadventures.com/122.html






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cam and carb advice please. [444-544]
posted by  hans  on Thu Sep 15 16:32 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.