Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

SOLVED! 700

Put jack stands under the two front jacking points. Starter mounting bolts are also two, of dozen trany to engine mounting bolts, no nuts and one or two of these bolt also mount the tranny dip stick tube.

Two bolts, 17 or 18mm heads, a 1/2" breaker bar with a pipe persuader and a few or three feet of extensions will get it loose. The ones I did looked like it had locktite on the threads which is not a bad idea because of the extreme vibrations and torque they withstand.

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stranded Volvo: No Start, No Crank... What to try tomorrow before getting it towed? [700]
posted by  someone claiming to be Frankie  on Sat Mar 9 19:26 CST 2013 >
  • New SOLVED! [700]
    posted by  someone claiming to be Frankie  on Sun Mar 10 17:08 CST 2013 >
    • New SOLVED! [700]
      posted by  javalion subscriber  on Mon Mar 11 11:14 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.