so this is what i have,
removed old CSV, tested it across battery with 12 V it works, as does the new one. When i crank engine i only have 10.5 volts to wire 44 with my digital tester, with either CSV connected (fuel line on) but not installed i get no fuel ejected. Apperas 10.5V is not enough to actuate the motor in the CSV.
I disconnect and reconnect CSV's directly to battery, the residual fuel in the valve ejects......ie both valves test good.
so the question is what is causing me to lose 1.5V and how do i fix??
i do not think cause is the thermo time sensor? that is all or nothing correct?
i am thinking once i fix isse with CSV, i should get a start condition,
Thanks in advance,
--
Rob
|