Good morning Ron
I replaced the old csv with a new one.I tested it it did not work until I
shorted the TT. Cranking it sprays with a great spray pattern at 10.5v on
the meter. I am in the midst of removing thermal timer cleaning it together
with the threading in block to improve ground per Rolfe.
If that does not work then it appears I would need a new thermal timer. If
I do not get start then I think I need to look at pressure sensor again. My
press sensor appears to be operating correctly I was reaserching last night
and I m getting a vacuum tool to pull gradual pressure on it and take
readings.....does anyone have experience at this i realize I need to do
this with care
Thanks in advance
|