Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2018 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My Earl Scheib experience 700 1987

posted by  Detailer on  Tue May 13 03:07 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I wet sand with 2000 grit it takes a little longer but is much safer than 600-1500. Here is the trick.

Sand in a front to rear motion,never in circels as that will leave hi/low spots and swirls. Use the palm of your hand with even pressure and sand slow and lightly keep water trickeling not to much,when satisfied with the finnish smoothness. Buff.

To buff use 3M fine cut and a lot of force working in a front to rear motion. After the 3m use AUTOMAGIC BCII to bring out the luster and to get rid of the fine scratches fron the 3M use many light passes after you see a gloss to remove the swirl marks. (I use bcII)with out compounding)with a lot of pressure.GOOD LUCK! e-mail if you need.
--
Kevin * HONDA spanking,1985 240DL * VOLVO ON!!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New My Earl Scheib experience [700][1987]
posted by  DaJet  on Sun May 11 12:51 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.