Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

UPDATE (cold idle.. help needed !!) 200 1989

posted by  newbee on  Tue Nov 25 18:23 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm rambling here....
The TPS is still bothering me. I hear the click tho. What a mess that thing was. I drilled a teeny TINY drain hole on the corner that points downward just in case oil makes it's way thru there again. The tps is set correctly too. It clicks as soon a s the thrtl blade moves. The car still runs like crap. The IAC is suspect too. I cleaned it further. No positive results. Both parts work properly when tested off the car. ( using my Fluke volt meter and/or giving it power to energize.)
ANOTHER UPDATE: I did find a slit in the bellows duct where it rubbed the fender apron.. I patched it with some gooey RTV sealant. The car still runs shitty. Damn!! It runs like I have a serious vacuum leak' Like a big one. I have scoured the motor over and over.
Oh, The air meter is suspect too.
I have back probed all the wires to be sure the have continuity and all..
I need to learn how to get codes on these bricks! Got a set of instructions yesterday.
Matt> newbee 89 240 DL
84 mustang SVO (2.3L turbo, intercooled)







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cold idle.. help needed !! [200][1989]
posted by  newbee  on Sun Nov 23 15:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.