Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Not running on all 4? Or am I missing something? 700

posted by  Andrew in AL on  Mon Mar 14 02:06 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:17 CST 2014
[RELATED]

Lucid ..

Hey - make me a bit more 'lucid' on this one ...OK? Take a look at my questions in the text, if you would.

1 - Pull plugs and rotate crank to #1 0° TDC Compression
2 - Verify #1 and #2 valves closed - look thru oil fill hole, cams pointed upward.
3 - Rotate crank about 90° past TDC
ROTATE CLOCKWISE (toward batt)?
4 - Stuff 3' to 4' of clothesline into # 1 plug hole, leaving 6" outside
5 - Use socket, breaker bar, and pipe extension to loosen pulley bolt
ROTATE COUNTERCLOCKWISE (away fro batt)?
6 - Tighten bolt the same way, but start with crank about 90° before #1 TDC Comp.
TIGHTEN CLOCKWISE (to batt)?

Next timing belt I am going to do myself for sure ..and I am making a folder of hints like this. Thanks for putting it out there!
--
'89 764 (110K), '94 940T (180K) , '92 745T (totaled 2-10-05 RIP)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Not running on all 4? Or am I missing something? [700]
posted by  N7SC  on Sat Mar 12 12:23 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.