Volvo V8 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Clutch cable vs. Hydraulic clutch

posted by  wongg3 on  Wed Apr 13 15:04 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 20:12 CST 2014
[RELATED]

Reading through Turbobricks a little, here is a pic of a 260 clutch pedal, for the hydraulic setup, I think that's a 240 pedal on top:



Actually, if you go view that pic and then look at M920.jpg to M926.jpg , there are a bunch of pics.

Hmm, from one of the threads on Turbobricks, Kevin Hawkinson says he is using a Wilwood clutch MC, it has a 3/4" bore, same as the 260 MC. Here are 2 pics in which you can see the 260 MC, and this Wilwood one that is $45.99 at Daymotorsports.com. I am trying to contact Kevin to see if any modifications were needed, and what pedal he used.





One of the advantages of using this Wilwood one is that it uses an AN connection, so it should be easy to make your own custom hose, instead of trying to use a Volvo hose.

Hope this helps, I'm getting all worked up to try this myself.

Greg
--
http://home.earthlink.net/~greg.wong/






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clutch cable vs. Hydraulic clutch
posted by  Volvo_142E  on Tue Apr 12 13:23 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.