Morning Klaus,
I have been assuming that I should be able to find an arrangement of cam sprockets and the crankshaft sprocket that would align the three and that I would then 'freeze' this arrangement with the use of the cam locking device so that I could put everything back together as it came off. I have turned the engine over manually several times trying to find this kind of a setting. This would seem to be an incorrect idea.
I have so far been unable to find only one mark and that is on the exhaust cam sprocket. I put a red paint mark on that and I also put a red mark on the intake cam sprocket using the plastic cam cover indicator as the place for the mark.
I take it the M marks are irrelevant.
Thanks for your encouragement. Will keep trying.
Bob
|