Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

123 Distributor install help - B20F

I don't know anything about the 123 distributor - but--you wrote--"These distributors can't be installed 180 degrees out due to the offset drive, right? So, installing the new dist. should be as simple as dropping the new unit in and static timing the system. Not really any chance to get it upside down, right?" NOT SO!! Does your new distributor point to #1? The drive at them bottom of the original distributor can be installed one of two ways-- the securing pin is centrally located--the offset drive will be on one side or the other. Does the new distributor match the old? -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 123 Distributor install help - B20F
posted by  someone claiming to be SprtWgn  on Fri Feb 19 20:32 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.