Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

later MC adapter ring 120-130

posted by  Danny on  Tue Sep 23 04:09 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 22:01 CST 2014
[RELATED]

Very nice and thanks for the pictures.
Is your aluminum plate 3/4" thick because that's the depth of the end of the MC behind the flange?

So the crossbar is just a restraint - keeps the pedal arm from coming too far forward. The picture flash makes it difficult to see, but it looks like a piece of angle, and then you just fastened the switch bracket to that (?)

Do you recall the length of the bolt you started with? I guess the overall length of the rod is determined by the MC's specifics, but if you know what yours ended up being that would be useful. And thanks again for the pictures.

By the way is Ron's switch anything special? Couldn't a properly rated microswitch be used? I might do this if I had a cheap source for the switch, though my hydraulic switch is working fine. What prompted you to switch to the electric pressure switch?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New later MC adapter ring [120-130]
posted by  Danny  on Tue Sep 16 06:26 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.